Contact Us

  • Add:No.99 ErShengTown, Jurong, Jiangsu, 212432, P.R. China
  • Tel:0553-8118891
  • Fax:0553-8118891
  • Mobile:18505530706
  • http://www.reactiveextrusion.com
  • Email:
Home > Products  > Fluorosilicone Compounds > General Grade > General Grade
prev
General Grade
General Grade
General Grade
General Grade
General Grade
next
General Grade
Product Description:
Fluorosilicone compounds are fluorosilicone gums compounded with fillers and additives
  • Product Details

Product Description:

Fluorosilicone compounds are fluorosilicone gums compounded with fillers and additives.

¡¡¡¡    1:Wide service temperature£¨-60¡«200¡æ£©

¡¡¡¡    2: Solvent and oil resistance analogous to fluorous rubbers¡¡(FKM)¡¡

¡¡¡¡    3: Good tensile retention at high temperature.

¡¡¡¡    4: Fine insulating property

¡¡¡¡    5: Low gas permeability

Compared with traditional silicone compounds, the advantages of fluorosilicone compounds are its nature of anti-oil, anti-solvent and anti-chemical agents. On the other hand , Fluorosilicone compounds has the similar abilities to anti-alkane solvents as fluorous rubbers.Its aromatic hydrocarbon solvent resistance is even superior to FKM. The suitable solvent for Fluorosilicone compounds is only ketones with high polarities. Soaked in the same medium, time and temperature, the Fluorosilicone compounds also show good durability. The cold enduranceand permanent compression set of FVQM are better than FKM. The FVQM show good properties from low to high temperature and are less temperature dependency. Secondly, FVQM can make low hardness products without adding plasticizer.Therefor the FVQM as a new high performance material are widely used in industry applications.

Characteristic:

Compared with traditional domestic FVQM compound which is roll-sticking and hard to process, our products are easy to handle like imports through special formulas and mixing process. We can also customize the compounds for different applications.

Technical Index:

  FSIR-201 FSIR-202 FSIR-203 FSIR-204 Testing Methods
Grade General  
Hardness shore A 40¡À2 50¡À2 60¡À2 70¡À2 ASTM D2240
ensile Strength MPa ¡Ý7.0 ¡Ý8.0 ¡Ý10.0 ¡Ý10.0 ASTM D412
Elongation at Break% 420¡À75 400¡À75 400¡À75 350¡À75 ASTM D412
Permanent Tensile Set % 3¡«8 3¡«8 3¡«8 3¡«8 GB/T528-1998
Tear Strength KN/m ¡Ý13 ¡Ý15 ¡Ý22 ¡Ý20 ASTM D624-B
Permanent Compression Set 200¡æ 22hr(30%) ¡Ü20 ¡Ü22 ¡Ü22 ¡Ü25 ASTM D395
Volume change in Fuel C%(24¡æ¡Á70hr) ¡Ü25 ¡Ü23 ¡Ü20 ¡Ü20 ASTM D471

Applications:

Aviation, Vehicle, Ships, Electrocommunication, precise instrument, petrochemical industry and Healthy Care.

pack:

Packing with Al compound packing film bag£¬25 Kilograms per bag.

Storage life:

Keep at clean, dry and ventilated environment . Validity : 2 years.

Attentions:Be avoided to contact with acidic and alkaline material before using